Philips s5000 series User Manual page 12

12
English
Replacement reminder
Turbo setting (specific types only)
While you activate the travel lock, the travel
lock symbol lights up continuously. When the
travel lock is activated, the travel lock symbol
flashes.
Deactivating the travel lock
1 Press the on/off button for 3 seconds.
The travel lock symbol flashes and then lights
up continuously. The appliance is now ready for
use again.
For maximum shaving performance, we advise you
to replace the shaving heads every two years. The
appliance is equipped with a replacement reminder
which reminds you to replace the shaving heads.
The shaving unit symbol and arrows light up to
indicate that you have to replace the shaving heads.
Note: After replacing the shaving heads, you need
to reset the replacement reminder by pressing the
on/off button for 7 seconds.
The appliance is equipped with a Turbo or Turbo+
setting. This setting is intended for quicker and
more intense shaving and makes hard-to-reach
areas easier to shave.