Audiovox Prestige P-975 Owner's Manual page 4

BASS CONTROL
To adjust the bass level (Equalizer function inactive), first select
the Bass mode by pressing the SEL button
appears on the display panel. Within 5 seconds of choosing the
Bass mode, press the AUDIO CONTROL
the bass response, or the AUDIO CONTROL button to increase
it as desired. The level will be shown on the display panel from a
minimum BAS -12 to a maximum of BAS +12 (BAS 00 indicates
flat response). The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
function is activated.
NOTE: Bass and Treble cannot be adjusted while Equalizer
function is in ROCK, CLAS or POP mode.
TREBLE CONTROL
To adjust the treble level (Equalizer function inactive), first select
the Treble mode by pressing the SEL button
indication appears on the display panel. Within 5 seconds of
choosing the Treble mode, press the
to decrease the treble response or the
button to increase it as desired. The level will be shown on the
display panel from a minimum TRE -12 to a maximum of TRE +12
(TRE 00 indicates flat response). The display will automatically
return to the normal indication 5 seconds after the last adjustment
or when another function is activated.
LEFT/RIGHT BALANCE CONTROL
To adjust the left-right speaker balance, first select the Balance
mode by pressing the SEL button
appears on the display panel. Within 5 seconds of choosing the
Balance mode, press the AUDIO CONTROL button
the stereo balance to the left channel speakers or the
CONTROL button to adjust it to the right channel speakers. The
balance position will be shown on the display panel from BAL L16
(full left) to BAL R16 (full right). When the volume level between
the left and right speakers is equal, BAL 00 will be shown on the
so the BAS indication
display panel. The display will automatically return to the normal
indication 5 seconds after the last adjustment or when another
button to decrease
function is activated.
To adjust the front-rear speaker balance, first select the Fader mode
by pressing the SEL button
the display panel. Within 5 seconds of choosing the Fader mode,
press the
speaker balance to the rear speakers or the
button to adjust it to the front speakers. The fader position will be
shown on the display panel from FAD R16 (full rear) to FAD F16
(full front). When the level between the front and rear speakers is
equal, FAD 00 will be shown on the display panel. The display will
so the TRE
automatically return to the normal indication 5 seconds after the
last adjustment or when another function is activated.
AUDIO CONTROL button
AUDIO CONTROL
When listening to music at low volume levels, this feature will boost
the bass and treble ranges to compensate for the characteristics
of human hearing. Press the button momentarily to activate this
feature; the LOUD indication will appear on the display panel.
Pressing the button again momentarily will deactivate the feature
(the LOUD indication will disappear from the display panel).
so the BAL indication
Each time this button is pressed, the radio band is changed. The
indication AM1, AM2, FM1, FM2 or FM3 will appear on the display
to adjust
panel according to your selection.
AUDIO
-4-
FRONT/REAR FADER CONTROL
so the FAD indication appears on
AUDIO CONTROL button
LOUDNESS CONTOUR (LOUD)
AM/FM BAND SELECTOR (BAND)
to adjust the front-rear
AUDIO CONTROL