4 Use your
product
This section helps you use this product to play
audio from connected devices.
Before you start
•
Make the necessary connections described
in the quick start guide and the user
manual.
•
Switch this product to the correct source
for other devices.
Adjust the volume
1
Press Volume +/- to increase or decrease a
volume level.
•
To mute sound, press
•
To restore the sound, press
press Volume +/-.
» If volume is set to the maximum or
minimum, the white LED on the right
base speaker blinks two times.
Choose your sound
This section helps you choose the ideal sound
for your video or music.
Sound mode
Select predefined sound modes to suit your
video or music.
Press MOVIE to create a surround listening
•
experience. Ideal for watching movie.
Press MUSIC to create stereo sound. Ideal
•
for listening to music.
Press VOICE to create sound effect
•
which makes human voice more clear and
outstanding for listening.
EN
12
.
again or
Equalizer
Change the high frequency (treble) and low
frequency (bass) settings of this product.
1
Press TREBLE +/- or BASS +/- to change
the frequency.
» If the treble or bass is set to the
maximum or minimum, the white LED on
the right base speaker blinks two times.
Synchronize video and sound
If the audio and video are not synchronized,
delay the audio to match the video.
1
Press AUDIO SYNC +/- to synchronize
the audio with the video.
•
AUDIO SYNC + increases the sound
delay, and AUDIO SYNC - decreases
the sound delay.
» If the value of sound delay is set to the
maximum or minimum, the white LED
on the right base speaker blinks two
times.
Night mode
For quiet listening, night mode decreases the
volume of loud sounds when audio is played.
Night mode is only available for Dolby Digital
soundtracks.
1
Press NIGHT ON/OFF to turn night
mode on or off.
Play music via Bluetooth
Through Bluetooth, connect your product with
a Bluetooth device (such as an iPad, iPhone,
iPod touch, Android phone, or laptop), and then
you can listen to the audio files stored on the
device through the speakers of this product.
What you need
•
A Bluetooth device which supports
Bluetooth profile A2DP, and with Bluetooth
version as 4.1.