Operating The Appliance; Loading Laundry And Switching On The Dryer; Setting A Program; Starting The Program - Siemens WT45N200GB Installation And Operation Instructions Manual

Operating the appliance

en
1
Operating the
appliance
Loading laundry and
O p e r a t i n g t h e a p p l i a n c e
switching on the dryer
The dryer must be correctly
Note:
positioned and connected, ~ Page 12.
Place the laundry in the drum.
1.
To switch the dryer on, turn the
2.
program selector to any program.
Close the dryer door.
3.
Caution!
Risk of material damage to the dryer or
laundry.
Take care not to trap any laundry in the
door.

Setting a program

If you have activated the
Note:
childproof lock, you must deactivate it
before you can set a program, see
~ Page 21.
Select the required program;
1.
detailed information on the programs
can be found from ~ Page 19
onwards.
22
Use the program selector to set the
2.
required program. The default
program settings for the selected
program appear in the display panel.
Default program settings are
Note:
standard settings that are already
defined when a program is selected.
After selecting a program, you can
see the default program settings in
the display panel.
If required, adjust the default
3.
program settings. You can find
detailed information on this from
~ Page 19 onwards.

Starting the program

Press the Start button.
If you want to lock the program
Note:
to prevent it from being inadvertently
adjusted, you can select the childproof
lock, see ~ Page 21.