Temperature Modes; Exiting Programming Mode; Sending Programming - Rointe AIR CONTROL Programming Manual

The range of temperatures of the ECO and COMFORT
modes are different, depending on the type of
programming you chose when turning on the remote
control (heating or water heating):
Icon
Icon
Once you have chosen the desired mode and
temperature for the current hour, move to the next
you want to programme using
previous sequence as many times as hours you wish to
programme.
6. If you want to activate the ANTI-FROST Mode in the
hours you set as OFF, press
on the screen). To deactivate it, press
7. Press
exit the programming mode.
8. Send the programming to the desired radiator, towel
rail or water heater by pressing
of 2 m.
Remember this is only a quick programming guide. Please refer to the
full manual for more detailed information about the AIR Control remote.
Thank you.
ROINTE UK
Catalyst House
720 Centennial Court
Centennial Park
Elstree, Herts - WD6 3SY
T. 0845 604 5987
F. 0208 953 5861
rointe@rointe.co.uk
www.rointe.co.uk
Heating Selected
Mode
COMFORT
ECO
ANTI-FROST
Water heating selected
Mode
COMFORT
ECO
ANTI-FROST
or wait 1 minute without pressing any key to
Range of temperatures
20.0ºC – 30.0ºC
15.0ºC – 19.5ºC
8.0ºC
Range of temperatures
55.0ºC – 72.0ºC
40.0ºC – 54.5ºC
8ºC
or
(you will see
.
at a maximum range
. Repeat the
and 8.0º
GRACI15V1