Table of Contents
Advertisement
PROGRAMMING GUIDE
2. Before starting, please make sure that the time and
date are correct, and the remote control is in Automatic
function (indicated by the icon
3. By pressing
screen and the 7 days of the week will blink. Select
the days you want to programme by pressing their
corresponding keys from 1 to 7 (
» Selected days will stop blinking.
» Unselected days will keep blinking on the screen.
You can freely select one, all, or a selection of days to
programme.
If you have to cancel the selection of any day, simply
press its key, and it will blink again indicating that it has
been deselected.
4. Pressing
(
) that represents the hour by hour programme.
You will see 0h, 1h, 2h,... on the screen and the first
symbol ( ) will blink. By pressing
through the hours.
5. You can select one of the modes ECO, COMFORT
or OFF for each hour you want to programme, following
the next sequence (only one mode per hour is possible):
» By pressing
a flashing , you can change the temperature by
pressing
» By pressing
and a flashing , you can change the temperature
by pressing
» Pressing
appears on the screen, and a dot will appear
bouncing up and down).
PLEASE NOTE: If you change a mode temperature, it
changes it for all the hours with this mode set.
. You will see Sel1, Sel2, Sel3,... the
you will access the dotted strip
once: ECO Mode (you will see
or
).
again: COMFORT Mode (you will see
or
).
one more time: OFF (no temperature
AIR Control
on the screen).
):
or
you can move
and
3
Advertisement
Table of Contents
Need help?
Do you have a question about the AIR CONTROL and is the answer not in the manual?
Questions and answers