N-Com basic kit multi Instructions For Use Manual page 10

10
Fig. 3
Fig. 5
 Remove the inner lining, if present.
 Cut the Velcro used to secure the speakers so as
to obtain two pieces that adapt to the shape of
the helmet ears area (Fig. 3).
 Remove the film from the Velcro and position the
latter on the helmet ear area. Repeat the
procedure on both sides.
N.B.: If possible, position the Velcro underneath
the comfort padding (Fig. 4).
Position the speaker so that it adheres perfectly

to the Velcro (Fig. 5). Repeat the procedure on
the opposite side.
Fig. 4