Completing The Installation - D-Link DUB-1312 User Manual

Section 2 - Installation
After installation, the Connection Speed LED on the DUB-1312 will illuminate solid orange only if the device is connected to
a 1 Gbps network. It will remain off if the DUB-1312 is connected to a 10/100 Mbps network. The Link/ACT LED will be solid
green when a connection is present, and will flash green when data is being transmitted or received.
If both LEDs are unlit, there may be a problem with the physical connection. Check the connection and cables between the
DUB-1312 and your switch or router. Also verify that your network switch or router is powered on.
Number
1
2
D-Link DUB-1312 User Manual

Completing the Installation

1
Indication Status
Solid
Connection Speed
Solid
Link/ACT
Flashing
2
Off
Description
1 Gbps connection present
10/100 Mbps connection present
An active connection is present
Data is being transmitted/received
16