Checking The Accessories; Inserting Batteries Into The Remote Control - Sony KDL-60NX801 Operating Instruction

Checking the accessories

For all models
Table-Top Stand (1)
Remote control (1)
Size AAA batteries (2)
For KDL-60NX801, KDL-60/52/46NX800
and KDL-46/40NX700 models
AC power cord (1)
Bottom Cover (1)
and KDL-60/52/46NX800 only)
Stand Rear Cover (1)
Fixing screws for Table-Top Stand
(M5 × 16) (4)
Assembling Screws for Table-Top
Stand (M5 × 16) (4) (KDL-40NX700 only)
Black Spacers (4)
(KDL-52/46NX800 only)
Silver Spacers (4)
and KDL-60NX800 only)
Screws (M6 × 20) (4)
(KDL-60NX801 and KDL-60NX800 only)
For KDL-55NX811, KDL-60/55/
46NX810, KDL-46/40NX711 and
KDL-46/40NX710 models
Hexagon wrench (1)
Assembling screws for Table-Top
Stand (4)
(KDL-55NX811, KDL-60/55/46NX810,
KDL-46NX711 and KDL-46NX710 only)
Assembling screws for Table-Top
Stand (2)
(KDL-40NX711, KDL-40NX710 only)
3D Glasses (battery included) (2)
(KDL-55NX811 and KDL-46/40NX711 only)
Pouch for 3D Glasses (2)
(KDL-55NX811 and KDL-46/40NX711 only)
3D Sync Transmitter (1)
(KDL-55NX811 and KDL-46/40NX711 only)
Double-sided tape (2)
(KDL-55NX811and KDL-46/40NX711 only)
*1 KDL-60NX801/60NX800 models are
shipped with the parts attached to the TV.
KDL-55NX811, KDL-60/55/46NX810,
KDL-46/40NX711, KDL-46/40NX710 and
KDL-40NX700 models requires assembling.
Refer to other leaflet to assemble the Table-
Top Stand.
*2 Please refer to the model name printed on the
remote control.
4
Downloaded From TV-Manual.com Manuals
*1
*2
*3
(KDL-60NX801
*3
*3
*4
*4
(KDL-60NX801
*4
*3 KDL-60NX801/60NX800 models are
shipped with the parts attached to the TV.
*4 These screws and spacers are required when
installing an optional Wall-Mount Bracket.
You must use these screws instead of the ones
provided with the bracket for safety reasons.
Be sure to keep them in a safe place until you
are ready to use the Wall-Mount Bracket. See
page 23 for the recommended Wall-Mount
Bracket for your TV.
Inserting batteries into the
remote control
1
Remove the protection sheet.
2
Push and slide the cover upward.
Guidelines for Remote Control
• Point your remote control directly at the
IR sensor located on your TV.
• Make sure that no objects are blocking the
path between the remote control and the
IR sensor on your TV.
• Fluorescent lamps can interfere with your
remote control; try turning off the
fluorescent lamps.
• If you are having problems with the remote
control, reinsert or replace your batteries and
make sure that they are correctly inserted.