Remote Control Function - Sharp LC-32WD1E Operation Manual

Quick start guide

Remote control function

1
(Standby/On)
Switches the TV between on and
standby mode. (See page 7.)
2 AV MODE
Selects a preset audio/video setting
(AV Mode). (See page 13.)
3 OPC
Turns the Optical Picture Control
(OPC) "On" and "Off". (See page 13.)
4 0–9
TV/DTV: Directly selects the channel.
Teletext: Selects the page.
5
(Flashback)
Returns to the previous channel or AV
input.
6
(WIDE MODE)
Selects wide mode. (See page 20.)
7
(Sound mode)
See "Using Multiplex" on page 6.
8 EPG
DTV: Displays the EPG (Electronic
Programme Guide) screen. (See
page 26.)
9 ESG
DTV: Displays the ESG (Electronic
Service Guide) screen. (See page 26.)
10
(Teletext)
TV: Selects the teletext mode. (See
page 21.)
DTV: Selects the teletext mode or
MHEG5 (if available). If both are
available, press for MHEG5. Press for
1-2 seconds for teletext. (See page 21
and 28.)
11 / / /
Selects an item on the screen.
12 END
Press to exit the on-screen display
menu screen.
13
(Reveal hidden teletext)
Reveals/hides hidden teletext
information. (See page 20.)
14
(Freeze/Hold)
TV/DTV/External: Freezes the on-
screen image.
Teletext: Stop updating teletext pages
automatically or release the hold
mode.(See page 20.)
15 TruSurround
Turns SRS TruSurround® "On" and
"Off". (See page 15.)
16 RADIO
DTV: Switches between RADIO and
DTV Mode.
17
(Mute)
Turns the sound "On" and "Off".
Downloaded from www.Manualslib.com
18
(Cursor)
19
20
21
22
23
manuals search engine
DTV
Switches between analogue TV mode
and DTV mode.
(+ / -) (Volume)
Increases or decreases the volume.
P ( )
TV/DTV: Selects the channel.
External: Switches to TV or DTV input
mode.
Teletext: Move to the next or previous
page.
(Input source)
Selects an input source. (See page 9.)
SLEEP
Sets the amount of time the TV will
stay on before automatically turning
off. (In units of 30 minutes to a
maximum of 2 hours 30 minutes.)
(Display information)
TV: Displays channel information. (See
page 21.)
DTV: Displays the service banner.
(See page 27.)
24 DTV MENU
DTV: Displays the DTV on-screen
display menus. (See page 22.)
25 MENU
Displays the Main TV on-screen
display menus. (See page 11.)
26 OK
Selects an option in the on-screen
display menu. Displays the programme
list (except for external input).
27 RETURN
Returns to the previous menu.
28
(Subpage)
Displays current time.
Teletext: Displays or hides subpages.
(See page 20.)
29
(Subtitle for Teletext)
TV/External: Turns the teletext
subtitles "On" and "Off".
DTV: Displays/hides the subtitle
selection.
30 Colour (Red/Green/Yellow/Blue)
TeleText: Selects a group or block of
pages displayed in the coloured
brackets at the bottom of the screen by
pressing the corresponding colour
button on the remote control.
DTV: When using the on-screen
display, assigned tasks as indicated at
the bottom of the screen.
Using Multiplex
DTV mode— Press to change
languages.
Analogue TV mode—Each time you
press , the mode switches as
illustrated in the following table.
Signal Selectable Item
Mono
Mono Mono
A2 TV broadcasts selection
Mono Mono
Stereo Stereo, Mono
Dual Channel A (I), Channel B (II),
Channel AB (I+II)
NICAM TV broadcasts selection
Mono NICAM Mono
Stereo NICAM Stereo, FM/AM* Mono
Dual NICAM Channel A (I), NICAM
Channel B (II), NICAM Channel
AB (I+II), FM/AM Mono*
* Depending on the country, the option is
either AM or FM mono.
6