Sony MHC-GNZ444D Operating Instructions Manual page 83

Picture
There is no picture.
 Press FUNCTION +/
to select "DVD" (or press DVD 
on the unit).
 Check that the system is connected
securely.
 The video cord is damaged. Replace it
with a new one.
 Make sure you connect the unit to the
video input jack of your TV (page 22).
 Make sure you turn on the TV and
operate the TV correctly.
 Make sure you select the video input
on the TV so that you can view the
pictures from the system.
 Make sure you set the color system
correctly, according to your TV's color
system.
 Make sure you connect the unit and
your TV using only the supplied video
cord.
Picture noise appears.
 Wipe the disc clean (page 88).
 If video signal from your system has to
go through your VCR to your TV, the
copy-protection applied to some DVD
VIDEO programs could affect the
picture quality.
 Keep the speaker cords away from the
antennas.
 Set the color system to match your TV
(page 56).
The aspect ratio of the TV screen
cannot be changed even though you
can set "TV TYPE" under "SCREEN
SETUP" in the Setup Menu when you

repeatedly
play back a wide picture.

 The aspect ratio is fixed on your DVD
 Depending on the TV, you may not
Messages do not appear on the TV
screen in the language you want.
 Select the language you want for the
The language for the sound track
cannot be changed.
 Multilingual tracks are not recorded on
 The DVD VIDEO prohibits changing
The subtitles language cannot be
changed.
 Multilingual subtitles are not recorded
 The DVD VIDEO prohibits changing
The subtitles cannot be turned off.
 The DVD VIDEO prohibits turning off
VIDEO.
change the aspect ratio.
on-screen display in "OSD" under
"LANGUAGE SETUP" in the Setup
Menu (page 25).
the DVD VIDEO being played back.
the language for the sound track.
on the DVD VIDEO being played
back.
the subtitles.
subtitles.
Continued


GB