Adjusting The Delay Between The Picture And Sound; A/V Sync - Sony MHC-GNZ444D Operating Instructions Manual

Selecting a transition effect for image
files in the slide show
(JPEG image files only)
1
Press DISPLAY
the Control Menu for JPEG image
files appears on the TV screen.
2
Press  or 

ENTER
The options for "EFFECT" appear on
the TV screen.
3
Press  or 
the setting you want.
The default setting is underlined.
 MODE 1: The image sweeps in
from top to bottom of the screen.
 MODE 2: The image sweeps in
from left to right of the screen.
 MODE 3: The image stretches out
from the center of the screen.
 MODE 4: The images randomly
cycle through the effects.
 MODE 5: The next image slides
over the current image.
 OFF: Turns off this function.
4
Press ENTER
The selected setting takes effect.
4
GB

repeatedly until

repeatedly to select
(EFFECT), then press
.

repeatedly to select

.
Adjusting the delay
between the picture
and sound

 A/V SYNC

When the sound does not synchronize
with the pictures on the screen, you can
adjust the delay between the picture and
sound.
1
Press DISPLAY
playback is stopped.
The Control Menu appears on the TV
screen.
2

Press  or 
select

press ENTER
The options for "A/V SYNC" appear
on the TV screen.
3

Press  or 
select the setting you want.
The default setting is underlined.
 OFF: Does not adjust.
 ON: Adjusts the difference between
picture and sound.
4

Press ENTER
Note
Depending on the input stream, this function
may not be effective.

when
repeatedly to
(A/V SYNC), then
.
repeatedly to
.