Nectre Fireplaces Baker's Oven Installation Instructions page 3

MINIMUM WALL CLEARANCES & FLOOR PROTECTION REQUIREMENTS
Seismic restraint tabs
965
100
350
•
All measurements in mm
•
Refer to detailed page on reducing wall clearances
These measurements are achieved with the fitting of a ½ round stainless steel flue reflector. The fitting of a
splash back does not alter these measurements.
Floor Protection:
PDF created with pdfFactory trial version
750
125
265
100
300
350
Non Combustible: All floor coverings must be trimmed to the minimum dimensions
above.
Combustible: A minimum 12mm thick fire cement sheet – Optional covered in tiles.
Alternatives – Bricks (or concrete to a minimum 50mm) laid on a sheet of galvanised iron
www.pdffactory.com
1350
650
650
1350
350
950
350
950
min. floor
750
protection
shown by
dotted line