Pc/Vga Mode - Akai ATE-55D1044K User Manual

PC/VGA MODE

- Connect a personal computer to this unit.
- Power on your computer and this unit.
- Press SOURCE button on the unit or remote control to select PC-RGB (VGA) input source.
- Press MENU button to display the main menu and select Picture using LEFT/RIGHT
navigation button.
- Use UP/DOWN navigation button to highlight "PC Setup" and press OK or RIGHT
navigation button to enter it.
- Press UP/DOWN navigation button to select preferred item.
- Press OK or RIGHT navigation button to enter submenu. Press LEFT/RIGHT navigation
button to adjust the value.
1. Auto Adjust
This item is used to adjust the PC screen automatically.
2. Horizontal Pos.
This item is used to adjust the value of horizontal position.
3. Vertical Pos.
This item is used to adjust the value of vertical position.
4. Size
This item is used to adjust the signals transfer speed.
5. Phase
This item is used to adjust the picture apply to the TV.
NOTE: For other menu operations in PC-RGB (VGA) mode, please refer to the menu
operations of DTV mode.
77