Dtv Mode - Akai ATE-55D1044K User Manual

DTV MODE

- Press SOURCE button on the unit or remote control to select DTV input source.
1. CHANNEL
1.1 Auto Tune
- Press OK or RIGHT navigation button to enter it.
- Use navigation buttons to set the Tune Type, Country and
LCN.
- Then highlight "Auto Tuning" and press OK to start
program tuning.
1.2 DTV Manual Tune
- Press OK or RIGHT navigation button to enter it.
- Use LEFT/RIGHT navigation button to select the channel.
Then press OK button to start searching.
1.3 Channel Edit
- Press OK or RIGHT navigation button to enter it.
- Press UP/DOWN navigation button to highlight desired
channel.
- Press RED button on remote control to delete highlighted
channel.
- Press YELLOW button on remote control to enter MOVE
mode. Then use UP/DOWN navigation button to select
preferred position and press YELLOW button again to move it.
- Press BLUE button on remote control to skip highlighted
channel.
- Press FAV button to set current channel as a favorite channel,
and press FAV button again to set it as a normal channel.
70