Table of Contents
Advertisement
INTRODUCTION
Read these instructions carefully and completely before
you install the machine. The installation should be
carried out by a qualified person who is familiar with all
local codes and ordinances for electrical and plumbing
connections.
WHAT YOU NEED
TOOLS
1) Phillips No. 2 screwdriver
2) Flat blade screwdriver
3) Torx screwdriver size T 20
4) Adjustable wrenches (if you use copper fittings)
5)
Open-ended wrench
(1/2˝ [12 mm], 5/8˝ [16 mm] and 1˝ [24 mm])
6) Tape measure
7) Spirit level
8) Electric drill with 1-1/2˝ drill bit
9) Keyhole saw
MATERIALS SUPPLIED
3
6x
1-1/2"
(38 mm)
* Only select models.
MATERIALS
• Minimum 3/8" OD copper tubing of sufficient length
for your installation
• Shut-off valve and fittings for water supply line
AUTOMATIC HIGH LOOP
The drain hose is fastened to the back of the machine at the best height. To eliminate potential drain problems,
leave this hose in place.
2
*
1
*
2
6
5
4
2x
2x
2x
3/8"
1"
(10 mm)
(25 mm)
CUSTOMER CARE CENTER 1-800-898-1879 • WWW.ASKONA.COM
NOTE:
Cosmetic damage must be reported to the ASKO dealer
within five days from the date of purchase. As soon as
you unpack the dishwasher, thoroughly check it for
cosmetic damage.
*
7
8
Advertisement
Table of Contents
