LG LMXS307*6S Series Owner's Manual page 91

Icemaker Errors
ER
IT
Harvest Error
ER
gf
Flow Meter Error
LG Electronics Training Center, LGEAI, U.S.A.
 The
ER iT Error
occurred because the icemaker Hall Sensor did not detect Icemaker tray movement.
 Check the Icemaker Motor, Hall Sensor, Wiring. This error usually requires the Icemaker Kit to be
replaced.
 This Error can only be brought up manually. It will not automatically display this error.
 The
ER gF Error
occurred because there was no input from the Flow Meter.
 Check the Flow Meter, Inlet Valves, Wiring, and Main PCB.
 This Error can only be brought up manually. It will not automatically display this error.
ER iT Error
An most likely will be a failure of the
Icemaker Kit
For a
91
ER gF Error check the water valves and
the flow meter on the pilot valve.