Panasonic SA-XR50 Operating Instructions Manual page 20

Audio settings
Multi control audio settings
Enter Multi
1
control mode.
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control mode menus
and factory settings
á back cover)
Change the
2
settings.
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL]
several times to select
"EXIT".
2. Press [INPUT SELECTOR].
20
SPEAKERS
A B
^
8
6.1CH DECODING
VCR 2
VIDEO IN L AUDIO IN R
MULTI CONTROL
Tone
You can adjust the level of the
bass and treble.
• The STEREO mode must be on
and input must
analogue or PCM signals. You
cannot adjust the tone if DVD
ANALOG 6CH is selected.
Balance
You can adjust the balance of the
front speakers.
Dual program
When the input signal is Dolby
Digital and "DUAL" appears in the
display, the audio to be output is
set.
MAIN:Main audio output
SAP:Sub channel audio output
MAIN+SAP: Main and sub channel
audio output
Dynamic range
compression
Change this setting to listen to
software recorded with
Digital at low volume (such as late
at night) maintaining audio clarity.
It reduces the peak level in loud
scenes without affecting the sound
field.
OFF:
The software is played with the
original dynamic range.
STANDARD:
The level recommended by the
producer of the software for
household viewing.
MAX:
The maximum allowable compression
(recommended for night viewing).
A/D attenuator
Turn the A/D attenuator on if
"OVERFLOW" lights
when using 2-channel analogue
input or DVD ANALOG 6CH input.
INPUT SELECTOR VOLUME
MULTI CONTROL
PUSH ENTER
DOWN
1. Select.
INPUT SELECTOR INPUT SELECTOR
be either
TONE
1. Select.
INPUT SELECTOR INPUT SELECTOR
BALANCE
1. Select.
INPUT SELECTOR INPUT SELECTOR
OPTION
Dolby
1. Select.
INPUT SELECTOR INPUT SELECTOR
OPTION
1. Select.
INPUT SELECTOR INPUT SELECTOR
frequently
OPTION
INPUT SELECTOR
MULTI CONTROL
PUSH ENTER
UP
PHONES
2. Select.
INPUT SELECTOR INPUT SELECTOR
BASS
BASS TREBLE
2. Adjust the balance.
INPUT SELECTOR INPUT SELECTOR
L R
2. Select.
INPUT SELECTOR INPUT SELECTOR
DUAL PRG
2. Select.
INPUT SELECTOR INPUT SELECTOR
DR COMP
2. Select.
INPUT SELECTOR INPUT SELECTOR
A/ D ATT
3. Adjust the level.
INPUT SELECTOR INPUT SELECTOR
0dB
-10 dB +10 dB
3. Select.
INPUT SELECTOR INPUT SELECTOR
MAIN
MAIN, SAP, MAIN+SAP
3. Select.
INPUT SELECTOR INPUT SELECTOR
OFF
OFF, STANDARD, MAX
3. Select.
INPUT SELECTOR INPUT SELECTOR
OFF
OFF ON