Table of Contents
Advertisement
3
Step
Multi control basic setup settings
Change the settings to suit your equipment to the environment in which you are using it. Before making any changes,
read the descriptions of the settings, note the factory settings and ranges, and refer to the equipment's instructions.
^
8
Turn on.
Enter Multi control
1
mode.
MULTI CONTROL
PUSH ENTER
Main menu is displayed.
(Multi control mode menus and factory
settings á back cover)
2
Select "SETUP 1
(BASIC SETUP)".
INPUT SELECTOR
Switching
SETUP 1
Change the settings.
3
• To cancel
MULTI CONTROL
PUSH ENTER
To finish settings
1. Press [MULTI CONTROL] several times
to select "EXIT".
2. Press [INPUT SELECTOR].
EXIT
10
Settings
SPEAKERS
A
B
^
8
6.1CH DECODING
VCR 2
VIDEO IN
L
AUDIO IN
R
Set the speaker combination connected to this unit.
SUBW: Subwoofer
L R: Front L/R
C: Center
S: Surround
SB: Surround Back
For the subwoofer (SUBW), select YES if you have
connected one, or NO if you have not.
LCR S SB: All speakers connected
L_R S SB: No center speaker
LCR S __: No surround back speaker
L_R S __: No center and surround back speaker
LCR _ __: No surround speaker
L_R _ __: Only front speaker
INPUT SELECTOR
Change these settings to suit the connections you
have made to the optical (OPT) and coaxial (COAX)
Entering
digital input terminals, so that the correct source is
selected when you turn [INPUT SELECTOR].
This unit automatically detects whether input is digital
or analogue, but you can fix the input mode.
AUTO: Automatically detects the input signal and
ANALOG: Fixes the input signal to analogue and
DIGITAL: Fixes the input signal to digital and plays
PCM FIX: Fixes the input signal to PCM and plays
Note regarding PCM FIX mode
In rare cases, the unit may have trouble recognizing the digital signals on discs.
With the PCM signals on CDs, this may cause the beginning of a track to be cut off. Engage the
PCM FIX mode if this occurs.
When PCM FIX mode is on, the unit cannot process other signals. This may cause noise to be
output. Select another mode in this case.
The PCM FIX mode remains on even if you turn the unit to standby.
MULTI CONTROL
Display
SPEAKERS
D-INPUT
(Digital input)
IN MODE
(Input mode)
plays
plays
MULTI CONTROL
INPUT SELECTOR
VOLUME
MULTI CONTROL
PUSH ENTER
DOWN
UP
PHONES
1. Select.
INPUT SELECTOR
SPEAKERS
1. Select.
INPUT SELECTOR
D- INPUT
1. Select.
INPUT SELECTOR
IN MODE
INPUT SELECTOR
PUSH ENTER
INPUT SELECTOR
INPUT SELECTOR
INPUT SELECTOR
Hide quick links:
Advertisement
Table of Contents
