Specifications; Product Service - Panasonic SA-XR10 Operating Instructions Manual

Specifications (IHF'78)
AMPLIFIER SECTION
Rated minimum sine wave RMS power output
20 Hz–20 kHz both channels driven
0.9 % total harmonic distortion
1 kHz continuous power output both channels driven
0.3 % total harmonic distortion
Total harmonic distortion
rated power at 20 Hz–20 kHz
half power at 1 kHz
Power output at 1kHz each channel driven
0.9 % total harmonic distortion
Front
Center
Surround
Load impedance
Front
Center
Surround
Frequency response
DVD/DVD 6CH, VCR, TV
Input sensitivity
DVD/DVD 6CH, VCR, TV
S/N (IHF A)
DVD, TV (DIGITAL INPUT)
Input impedance
DVD/DVD 6CH, VCR, TV
Tone controls
BASS
TREBLE
Subwoofer frequency response (–6 dB)
Digital input
Optical
Coaxial

Product Service

1. Damage requiring service — The unit should be serviced by
qualified service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
(b) Objects or liquids have gotten into the unit; or
(c) The unit has been exposed to rain; or
(d) The unit does not operate normally or exhibits a marked change
in performance; or
(e) The unit has been dropped or the cabinet damaged.
2. Servicing — Do not attempt to service the unit beyond that
described in these operating instructions. Refer all other servicing to
authorized servicing personnel.
3. Replacement parts — When parts need replacing ensure the
servicer uses parts specified by the manufacturer or parts that have
the same characteristics as the original parts. Unauthorized
substitutes may result in fire, electric shock, or other hazards.
4. Safety check — After repairs or service, ask the servicer to perform
safety checks to confirm that the unit is in proper working condition.
Frequency range
Sensitivity
100 W per channel (6 ) 50 dB quieting sensitivity
100 W per channel (6 )
Total harmonic distortion
0.9 % (6 )
0.08 % (6 )
S/N
2 x 100 W (6 )
100 W (6 ) Frequency response
2 x 100 W (6 ) Alternate channel selectivity
Capture ratio
6–8 Image rejection at 98 MHz
6–8 Spurious response rejection at 98 MHz
6–8 AM suppression
Stereo separation
10 Hz–44 kHz, ±3 dB
27 mV (200 mV, IHF '66) Antenna terminal
90 dB (98 dB, IHF '66)
Frequency range
Sensitivity
22 k
Selectivity
IF rejection at 1000 kHz
50 Hz, +10 to –10 dB
20 kHz, +10 to –10 dB
7–200 Hz
Output voltage at 1 V input (unbalanced)
Maximum input voltage
2
Input/output impedance
1
Power supply
Power consumption
Dimensions (W x H x D)
Mass
Notes:
1. Specifications are subject to change without notice.
2. Total harmonic distortion is measured by the digital spectrum
For product information or assistance with product operation:
In the U.S.A., contact the Panasonic Customer Call Center at 1-800-211-
7262, or e-mail consumerproducts@panasonic.com, or web site
(http://www.panasonic.com).
In Canada, contact Panasonic Canada Inc. Customer Care Centre at
905-624-5505, web site (www.panasonic.ca), or an authorized
Servicentre closest to you.
FM TUNER SECTION
MONO
STEREO
MONO
STEREO
MONO
STEREO
1 kHz
10 kHz
AM TUNER SECTION
VIDEO SECTION
GENERAL
Power consumption in standby mode:
Mass and dimensions are approximate.
analyzer.
Product information
87.9–107.9 MHz
11.2 dBf (2 µV, IHF '58)
18.3 dBf (4.5 µV, IHF '58)
38.3 dBf (45 µV, IHF '58)
0.2 %
0.3 %
73 dB
67 dB
20 Hz–15 kHz, +1 dB, –2 dB
65 dB
1.5 dB
40 dB
75 dB
50 dB
40 dB
30 dB
75 (unbalanced)
530–1710 kHz
20 µV, 330 µV/m
55 dB
50 dB
1±0.1 Vp-p
1.5 Vp-p
75
AC 120 V, 60 Hz
115 W
430 x 52 x 334 mm
(16-15/16'' x 2-1/16'' x 13-5/32'')
3.5 kg (7.7 lb.)
1 W
23