The Radio - Panasonic SA-XR10 Operating Instructions Manual

The radio

RECEIVER
TUNER/
BAND
RECEIVER
TOP MENU
DISPLAY
STOP
SOUND MODE CHANNEL VOLUME
SFC
1
4
7
DIRECT TUNING/
DISC
DIRECT TUNING/
DISC
L BALANCE R
Manual tuning
On the remote control
1. Press [TUNER/BAND RECEIVER].
The band changes each time you press the button.
2. Press [DIRECT TUNING/DISC].
3. Press the numbered buttons to enter the
frequency.
Tuning intervals: FM–0.1 MHz, AM–10 kHz
e.g. To select 107.9 MHz, press [1] / [0] / [7] / [9]
"TUNED" lights when tuned.
"STEREO" lights during FM stereo broadcasts.
Note
1. If you do not press a button while the cursor is flashing, the display
returns to the frequency being received.
2. If the frequency has not been input correctly, "ERROR" will be
displayed.
On the main unit
1. Press [INPUT SELECTOR] to select "TUNER
(FM)" or "AM".
" "
FM appears 2 seconds after you select
2. Press [TUNING 2 or 1] to select the frequency of
the station.
Tuning intervals: FM–0.2 MHz, AM–10 kHz
Automatic tuning
Hold down [TUNING 2 or 1] until the frequency begins to scroll. Tuning
stops when a station is found. (Tuning may stop if there is interference.)
Improving reception
¡ FM mode
You can improve FM reception by switching reception to monaural.
Press [FM MODE].
"MONO" lights.
Press [FM MODE] again to cancel.
¡ For your reference
Some equipment can interfere with radio reception. Turn off nearby
TV, VCR, DVD players, and satellite receivers or move them further
away from the antennas if this occurs.
18
DVD TV VCR
TUNER/ INPUT
BAND DIGITAL SELECTOR
RECEIVER
MENU
ENTER
RETURN
SLOW /SEARCH
SKIP
PAUSE PLAY
1
MUTING
SUBWOOFER
4
2 3
TEST
7
5 6 TONE
8 9 DELAY
0 10/ENTER LEVEL
TV VOL
TV/VIDEO TIMER
" "
TUNER .
INPUT SELECTOR
2 3
5 6
8 9
0
Preset tuning
Automatic presetting
1. Press [INPUT SELECTOR] to select "TUNER (FM)".
2. Press [TUNING 2 or 1] to tune to "FM 87.9 MHz".
3. Press and hold [MEMORY].
The FM stations the unit can receive are preset in channels 1 to 30.
4. Press [INPUT SELECTOR] to select "AM".
5. Press [TUNING 2 or 1] to tune to "AM 530 kHz" .
6. Press and hold [MEMORY].
The AM stations the unit can receive are preset in channels 21 to 30.
(FM stations are replaced if any were preset in these channels.)
During automatic presetting, the memory indicator (˜) flashes and the
frequency scrolls. The memory indicator and channel numbers are
displayed for a second when a station is preset.
The last station to be preset is displayed when presetting finishes.
Manual presetting
Preset the stations one at a time.
1. Tune to the station.
2. Press [MEMORY].
3. Press [TUNING 2 or 1] to select a channel.
4. Press [MEMORY].
For your reference
FM stations can also be preset in the MONO mode.
FM MODE MEMORY
2 TUNING 1