29. Other Observations; Final Running
This is where any other observations about the unit not
specifically covered by one of the numbered items on the
STIHL Engine Check can be recorded
Once repairs have
been made the last
part of the STIHL
Engine Check
document can be used
as a quality control
check to be sure the
engine starts easily
and is running to
specification
© STIHL Inc., Virginia Beach, VA
2013
Final Check: Roll Out Test
With the engine warmed
up and idling, and the
chain brake engaged on
a saw, slowly roll the
engine over so one side
faces the ground
Now roll it back upright,
then roll the other side
towards the ground
Idle RPM should not
change more than 200-
300 RPM
If the idle changes the
engine may have an air
leak or other fault
© STIHL Inc., Virginia Beach, VA
2013
US/STR
US/STR
confidential
confidential
43