Table of Contents
Advertisement
Operating Instructions
TU-HDT206A
Power requirements
Environmental Condition
Dimension
Accessory
EMC / Safety
Note
Design and specifications are subject to change without notice.
Caring for your Digital Receiver
Remove the mains plug from the wall socket. The cabinet can be cleaned with a dry clean
cloth. Do not use solutions containing benzol or petroleum.
Make sure that all the electrical connections are properly made. Do not connect any of
your equipment (TV, video recorder, etc.) to the mains supply until you have properly
connected all the other leads. Disconnect your Digital Receiver from the mains supply
before you disconnect any other equipment from its rear panel.
Trademark Acknowledgment and license notice
26
Mains input voltage
Mains input frequency
Power consumption
Temperature
Relative Humidity
Dimension
Weight
Remote Controller
Battery
User's manual
A/V Cable
RF Cable
Standard
Trade Mark of the DVB Digital Video Broadcasting Project (1991 to 1996)
Declaration of Conformity No. 4296, 22
Manufactured under license from Dolby Laboratories.
"Dolby" and the double-D symbol are trademarks of Dolby Laboratories.
HDMI, the HDMI Logo and High-Definition Multimedia Interface are trademarks
or registered trademarks of HDMI Licensing LLC.
AC 220 to 240 V
50 / 60 Hz
Normal operation: 14 W maximum
0 to 40 C
20 % to 80 % (Without condensation)
365 mm x 245 mm x 60 mm
2.45 kg
AA 1.5 V x 2
Operating Instructions
1.5 m, R/G/B for component video
1.5 m, R/W for stereo audio
1.5 m, 3C2V, IEC Male/Female
AS/NZS CISPR 13:2003 Class B
AS/NZS 60065: 2003
nd
August 2006
Advertisement
Table of Contents
