GE G017 Owner's Manual page 12

About Appliance Communication.
CleanSpeak
This washer can communicate with a compatible
dryer (one whose Owner's Manual contains a
CleanSpeak
WiFi Connect
Your washer is GE WiFi Connect Enabled. A WiFi
communciation card is built into the product
allowing it to communicate with your smartphone
for remote monitoring, control and notifications.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed
and used in accordance with the instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by turning the equipment off and on,
the user is encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/television technician for help.
Labelling: Changes or modifications to this unit not expressly approved by the manufacturer could void the user's
authority to operate the equipment.
12
TM
description) via WiFi Connect.
™
(for customers in the United States)
At the end of the wash cycle, the washer sends a signal
to the dryer to indicated a preferred dry cycle. When
the dryer becomes idle ("End" display times out - or-
the door is opened) "CYCLE" will scroll across its cycle
time display, its current cycle knob setting LED will be
lit, and (if different) a second recommended cycle LED
will blink. If "CYCLE" times out, pressing Power will
refresh it and the LEDs. If the dryer cycle knob is turned,
the solid LED will move accordingly. Pressing the dryer
Start will initiate the cycle knob setting (solid LED) and
turn off the recommended (blinking LED) if a different
cycle is started.
Please visit www.GEAppliances.com/connect to
learn more about connected appliance features,
to learn what connected appliance app's will work
with your smartphone.
WiFi Connectivity: For assistance with the appliance
or the ConnectPlus network connectivity, please call
800-GE-CARES.