Switching On The Appliance - Bosch KDN series Instructions For Use Manual

Hide thumbs Also See for KDN series:
Table of Contents

Advertisement

en
Switching on
the appliance
Switch on the appliance with the On/Off
button. Fig. 1/1
The appliance begins to cool. Light is
switched on when the door is open.
The factory has recommended
the following temperatures:
Refrigerator compartment: +4 °C
Freezer compartment: –18 °C
Operating tips
When the appliance has been
switched on, it may take several hours
until the set temperatures have been
reached.
The fully automatic No Frost system
ensures that the freezer compartment
remains free of ice. Defrosting is no
longer required.
The sides of the housing are
sometimes heated slightly. This
prevents condensation in the area of
the door seal.
If the freezer compartment door
cannot be immediately re-opened after
it has been closed, wait until the
resulting low pressure has equalised.
26
Setting
the temperature
Setting the temperature
Turn temperature controller, Fig. 1/5, to
the required setting.
When the controller is at a medium
setting, the temperature drops
to approx. +4 °C in the coldest zone.
Fig. 1/5
Higher settings lower the temperature in
the refrigerator compartment.
We recommend:
Perishable food should not be stored
above +4 °C.
Low setting for short-term
storage of food (energy-saving mode).
Medium setting for long-term storage
of food.
Select a higher setting only
temporarily, when the door is
frequently opened or large quantities
are placed in the refrigerator
compartment.
Freezer compartment
The temperature can be set from –16 °C
to –24 °C.
Keep pressing temperature selection
button 2 until the required freezer
compartment temperature is set. The
value last selected is stored.
The set temperature is indicated on
display 3.
We recommend a factory setting of –18
°C in the freezer compartment.

Advertisement

Table of Contents
loading

Table of Contents