Bosch sHe55C Use And Care Manual page 12

countdown display, or illuminating the reill rinse agent light as shown in
After illing the rinse agent dispenser, the indicator light will go out in a few minutes
consumption when washing small, lightly soiled loads that ill approximately half of the
· Press and hold the left "Cancel / Drain" button (see Figure 20), then press and hold the
· When the LED display shows a "00" or a "01" release both buttons.
· To enable the Additional Drying Heat, press the left "Cancel / Drain" button until the LED
display shows a "01".
· To disable the Additional Drying Heat, press the left "Cancel / Drain" button until the LED
display shows a "00".