Table of Contents
Advertisement
Inserting Batteries
Your camera requires two AAA batteries. Insert the batteries into the camera:
1.
Open the cover of the battery compartment on the back of the camera.
2.
Insert the batteries according to the polarities (+ and -) indicated on the
inside of the battery cover.
3.
Close the battery cover.
WARNING: Opening the battery compartment and/or removing the batteries will erase
the photos currently stored in the camera. Download your photos as often as possible.
Photos may be lost when the batteries run low.
The LCD will flash when your batteries are running low, in which case you will need to
replace your camera‟s batteries. Please download any photos you have on the camera
before opening the battery compartment. When battery voltage drops to 2.2V the LCD
will display "Lo" and the camera will turn off automatically.
Note: If you do not intend to use your camera for an extended period, remove the
batteries to avoid battery leakage and corrosion.
5
Advertisement
Table of Contents
