Huawei Mate 8 User Manual page 102

Touch the grid overlay icon to enable the overlay. You can
select a 3 x 3 grid, phi grid or a spiral overlay. Use the 3 x 3 grid
Grid
for general shooting scenarios. The phi grid is similar to the 3 x
overlay
3 grid, but uses the golden ratio to divide the viewfinder into
icon
distinct sections. Use the spiral grid for indoor photography or
portrait shots.
Low
Touch this icon to restore the default exposure settings. This
exposure
icon will only appear when the exposure is too low.
icon
•
: Touch to configure the metering mode (the method used
to determine the exposure). You can select matrix metering,
center-weighted metering or spot metering. Matrix metering is
set by default.
•
ISO: Touch to adjust the camera's sensitivity to light. Increasing
the ISO will create a brighter picture, but there will be a
noticeable increase in noise. You can configure the camera to
adjust the ISO automatically or you can adjust it manually.
•
S: Touch to set the shutter speed. You can configure the
camera to adjust the shutter speed automatically or you can
adjust it manually.
Manual
•
EV: Touch to set the exposure compensation. Select an
settings
exposure setting to increase/decrease the brightness. Touch
and hold the icon to lock the current exposure setting.
•
AF: Touch to set the focus mode. You can select touch to focus,
continuous autofocus or manual focus. Continuous autofocus
is set by default. When continuous autofocus is selected, touch
and hold the icon to enable the focus lock.
•
: Touch to select a white balance according to the ambient
light conditions. You can choose from daylight, tungsten bulb,
fluorescent lamp and more. You can also adjust the colour
temperature. Touch and hold the icon to lock the white
balance.
Camera and Gallery
95