Table of Contents
Advertisement
Warning Messages in the Viewer
Event notification
User management
Configuration
Adding a recording schedule
Confirmation Messages in the Viewer
Adding and editing a camera
Viewer window
Managing a layout
122
Message
Invalid E-mail Address.
The SMTP server port is invalid. Please specify a
value between 1 and 65535.
The POP server port is invalid. Please specify a
value between 1 and 65535.
The user name already exists.
Unable to change the user name. The user '<user
name>' already exists.
Please ensure that the password and confirmation
match exactly.
Are you sure you want to remove this user?
The number of connecting viewers has exceeded
the recommended number, and the recording
server is under high load.
The value for maximum must be greater than or
equal to 1 day.
Streaming for recording is applied only when the
following conditions are satisfied:
– the video stream format is JPEG
– the frame rate settings do not exceed 10 fps
– there is no existing recording-mode stream in
the camera.
Message
Are you sure you want to remove the camera
'<camera name>'? If the camera is removed, you
will not be able to play back recorded video.
This will replace an existing layout of the same
name. Are you sure you want to continue?
This layout is included in a layout sequence open
in another tab or window. Are you sure you want to
continue?
Are you sure you want to delete the selected layout
'<layout name>'?
Are you sure you want to delete the folder '<folder
name>'; including all layouts and layout
sequences inside it?
Shared layout sequences cannot contain personal
layouts. All of the personal layouts will be
automatically removed from this layout sequence.
Are you sure you want to continue?
Are you sure you want to delete layout sequence
<layout sequence name>?
Cause
Characters other than alphanumeric characters
and the underscore (_) were entered for the e-mail
address.
An invalid SMTP server port number was entered.
An invalid POP server port number was entered.
Tried adding a user to the Storage Server with a
name that already exists.
Tried adding a user name on the Storage Server to
a name that already exists.
The password in the [Confirm Password] field does
not match the user password.
Tried to delete a user.
Tried connecting 7 or more Viewers at one time.
Tried to specify less than one day for the maximum
storage period.
Tried to enable a recording-mode stream.
Cause
Tried to delete the camera.
Tried to save the current layout with a name that
already exists.
Tried to change and save settings for a layout
included in a sequence that is open in another tab
or window.
Tried to delete a layout.
Tried to delete a layout folder.
Tried adding a user layout to a shared layout
sequence.
Tried to delete a layout sequence.
Advertisement
Table of Contents
