Canon RM-Lite Administrator's Manual page 86

Network video recording software
Hide thumbs Also See for RM-Lite:
Table of Contents

Advertisement

• [Manual]
Compensate for the exposure manually. The
following exposure compensation settings are
displayed.
[Iris]: Specify the iris setting. Drag the slider to the left
to close down the iris and make the image
darker or to the right to open up the iris and
make the image brighter.
[Shutter]: Specify the shutter speed using 15 levels,
from 1/1 to 1/8000 seconds.
[Gain]: Specify the gain (sensitivity to brightness).
Drag the slider to the left to decrease the gain
and make the image darker or to the right to
increase the gain and make the image brighter.
➁ [Smart Shade Control]:
Specify a value to use for the camera’s smart shade
control feature when recording. Select one of seven
levels, from 1 (weakest) to 7 (strongest), or [Not
Specified]. If [Not Specified] is selected, the camera’s
smart shade control setting is used for recording. To
disable smart shade control, select [Off].
➂ [Aperture Mode]
Specify the camera aperture mode.
[Night Mode]
• [Not Specified]
Use the camera’s night mode function settings.
• [Disabled]
Disable the night mode function.
• [Enabled]
Record in night mode.
• [Auto]
The camera automatically decides when to switch to
night mode. When recording ends, the night mode
setting returns to the value before recording started.
➃ [White Balance]
Specify the appropriate white balance by selecting one
of the camera’s light source settings displayed in the
list.
If [Manual] is selected, use one of the following two
methods to adjust the white balance.
• [R Gain] and [B Gain]
Specify the white balance parameters by dragging
the sliders. Drag to the right to increase the gain (the
sensitivity to brightness).
• [One Shot WB]
Force white balance adjustment to a light source.
Using a white object (such as piece of white paper)
as a standard, fill the shot with the object and click
this button.
The Smart Shade Control feature is not supported.
[Auto] is unavailable for [Aperture Mode].
Important
If you select [Enabled] for Night Mode, you will not be able to
set the white balance. If you select [Auto] for Night Mode,
however, you will be able to set the white balance, but those
settings will be cleared when the camera switches to Night
Mode.
Note
When [Night Mode] is enabled in [Aperture Mode], both the
display and recorded video are in black and white.
Page 86

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rm-25Rm-64Rm-9

Table of Contents