Panasonic SC-PT953 Operating Instructions Manual page 4

1
step
Assembling the front speakers
Preparation
≥ To prevent damage or scratches, lay down a soft cloth and perform assembly on it.
≥ For assembly, use a Phillips-head screwdriver.
≥ There is no difference between the right and left speakers and stands.
≥ For optional wall mount, refer to page 6.
Make sure you have all the indicated components before starting assembly, setup, and connection.
2 Front speakers
Speaker assembly option
Thread the speaker cable through
the base.
Leave about 100 mm (3
You can remove and use the cable from
the stand. To reattach the cable, refer to
page 6.
∫ Preventing the speakers from falling
≥ You will need to obtain the appropriate screw eyes to match the
walls or pillars to which they are going to be fastened.
≥ Consult a qualified housing contractor concerning the
appropriate procedure when attaching to a concrete wall or a
surface that may not have strong enough support. Improper
attachment may result in damage to the wall or speakers.
4
2 Stands (with cable)
Position the cable
between the ridges.
z)
5
Leave about 80 mm (3 /
16
Attach the speaker.
z)
15 /
16
2 Bases
Slide into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push !
Press into the groove.
Tighten securely.
Insert the wire fully.
i: White
j: Blue
Push !
Press into the groove.
Tighten securely.
String (not included)
Thread from the wall to the speaker and tie tightly.
Rear of the speaker
8 Screws
Approx.
150 mm
Screw eye
Wall
(5
(not included)
z)
29 /
32