Panasonic SC-PT953 Operating Instructions Manual page 38

Panasonic operating instruction dvd home theater sound system sc-pt950, sc-pt1050, sc-pt953
Table of Contents

Advertisement

Troubleshooting guide
HDMI or progressive video
There is ghosting when HDMI or
progressive output is on.
Pictures not in progressive
output.
Closed captions not displayed.
Radio
Distorted sound or noise is heard.
"ST" flickers or does not light.
A beat sound is heard.
A low hum is heard during AM
broadcasts.
Wireless equipment
No sound.
The indicator on the wireless
equipment keeps flashing
between red and green.
Television displays
"/"
"Cannot display group xx, content xx"
"This disc may not be played in
your region"
No on-screen display.
Main unit's screen saver remains
38
≥ This problem is caused by the editing method or material used on DVD-Video, but should be
corrected if you use interlaced output.
– When using the COMPONENT VIDEO OUT terminal, set "Video Output Mode" in Picture Menu to
"480i". (Alternatively, press and hold [CANCEL] to switch to "480i".)
– When using the HDMI AV OUT terminal, set "Video Output Mode" in Picture Menu to "480i" output
marked with an "¢". Or, disable the HDMI AV OUT connection and use other video connections.
Make the settings in the following order:
1 Set "Video Mode" in the "HDMI" menu to "Off".
2 Set "Video Output Mode" in Picture Menu to "480i". (Alternatively, press and hold [CANCEL] to
switch to "480i".)
≥ Select "480p" in "Video Output Mode" in Picture Menu.
≥ The unit's VIDEO OUT terminal outputs the interlaced signal even if "PRG" is displayed.
≥ When HDMI or progressive output is on, closed captions will not be displayed.
≥ Adjust the position of the FM or AM antenna.
≥ Use an outdoor antenna.
≥ Turn the television off or move it away from the unit.
≥ Separate the antenna from other cables.
≥ Ensure that the digital transmitter is fully inserted into the slot of the main unit.
≥ Ensure that the wireless equipment is plugged into the AC outlet and is turned on. Then, check that
" [W1] " [and " [WS] " ([PT1050])] is displayed on the main unit's display.
≥ There is a power supply problem. Consult the dealer.
≥ The operation is prohibited by the unit or disc.
≥ You are trying to display incompatible contents.
≥ Only DVD-Video discs that include or have the same region number as the one on the rear panel of this
unit can be played.
≥ Select "On" in "On-Screen Messages" in the "Display" menu.
≥ When using the HDMI connection, audio/video information is continually transferred between the
main unit and the television regardless of which source has been selected on the main unit. This is
normal.
23
23,
26
23
7
9
9
10, 13
Cover
page
26

Advertisement

Table of Contents
loading

This manual is also suitable for:

Sc-pt1050Sc-pt950

Table of Contents