Advertisement
Front and Rear Panel Illustration
1. Front Panel
1. Standby Indicator:Used to visually show power state of the set top box, the green
LED will show if turned on the set top box and the red LED will be light if the set top
box entered standby mode.
2. REMOTE CONTROL SENSOR:Used to receive the signal from the remote control.
3.USB JACK:Used to connect to an external USB 2.0 device.
2. Rear Panel
R F
LOOP
R F
IN
IN
THROUGH
THROUGH
VCR O O
VCR O O
1.RF IN : This socket connects to your external aerial.
2.RF LOOP THROUGH: This socket will bypass the RF signal to either your TV or
another video system.
3.VCR SCART IN: This socket connects to either a DVD or other video system.
4.TV SCART OUT: If your TV has SCART input,please connect this set top box with
your TV using scart cabel.
If your TV has AV input , please connect this set top box with your TV by using RAC(AV)
cabel and included "Scart to AV adapter".
5.COAXIAL: This socket connects to a coaxial socket on your surround sound system.
6.MAINS CABLE: This is used to connect to your main power supply.
Remote Controller
12
13
3
14
15
16
17
18
19
20
21
22
100-240V~
50/60Hz
Digital
Audio
Coaxial
TV
TV
15. AUDIO: Select the audio language, and set the audio out type, Stereo, Left, Right, Mono.
16. MENU: Open the main menu or return to the previous menu.
17. EPG: Display information about the program being viewed and what's on next.
18. VOL-: Move around the menu screens or changing the volume in non-menu state.
19. CH- : Move around the menu screens or selecting the channels in non-menu state.
20. TEXT: Open the interactive digital teletext if available.
21. PAUSE: Pause or playback the program being viewed .
22.PAGE-: Page down, when there are pages(i.e.channel list).
Note: SUBTITLE/TEXT/LANGUAGE may not be available for all channels.
1
Remote Key Function:
1. MUTE:Turn the sound on or off.
2. NUMBER KEYS:Select channel numbers or
input numbers in menus.
3.TV/RADIO: Switch between TV channels and
Radio stations.
4. INFO: Display information about the channel
being viewed or further information about the program
3
when in small EPG screen.
4
5. SUBTITLE: Switch between different subtitles
5
that are broadcasted
6. EXIT: Clean all menu and return to non-menu
state for norm playing.
7. CH+: Move around the menu screens or
selecting the channels in non-menu state.
8. VOL+: Move around the menu screens or
changing the volume in non-menu state.
9. OK: confirm a selection within a menu.
10
10
Operate differnt functions in teletext.
11. PAGE+: Page up, when there are pages
11
(i.e.channel list).
12. DTV/VCR: Switch between the VCR SCART
input and the DTV output mode.
13.STANDBY: Switch the set top box to on or
standby.
14. FAV: Switch access your favourite channels.
Advertisement
