Exploded View; Specifications - Kenwood KAF-3030R-S Service Manual

KAF-3030R
Rated output power
(DIN) 1 kHz
at 8 Ω .............................................................. 50 W + 50 W
at 4 Ω .............................................................. 75 W + 75 W
(IEC/DIN) from 63 Hz to 12.5 kHz, 0.7 % T.H.D.
at 8 Ω .............................................................. 50 W + 50 W
at 4 Ω .............................................................. 75 W + 75 W
Effective output power
Except UK and Europe
(EIAJ) 1 kHz, 10 % T.H.D.
at 8 Ω .............................................................. 60 W + 60 W
at 4 Ω .............................................................. 90 W + 90 W
Damping factor ........................................................ 42 (50 Hz)
Total harmonic distortion
................................... 0.02 % (20 Hz ~ 20 kHz, 25 W, 8 Ω)
................................................. 0.002 % (1 kHz, 25 W, 8 Ω)
Frequency response (IHF'66)
Adv. DA / CD DIRECT ......... 5 Hz ~ 100 kHz, +0 dB, –3 dB
Adv. DA / CD, MD/CD-R,
TUNER, TAPE, AUX ............. 5 Hz ~ 60 kHz, +0 dB, –3 dB
PHONO 'RIAA' response ... 20 Hz ~ 20 kHz, +1.0 dB, –1.0 dB
Maximum input level
PHONO (MM) .................... 100 mV, 0.5 % T.H.D. at 1 kHz
Signal to noise ratio
PHONO (MM) ............................................... 72 dB (IHF'66)
Adv. DA / CD, MD/CD-R,
TUNER, TAPE, AUX .................................. 100 dB (IHF'66)
Adv. DA / CD DIRECT ................................ 102 dB (IHF'66)
PHONO (MM) ........................ 60 dB (DIN, 50 mW output)
Adv. DA / CD, MD/CD-R,
TUNER, TAPE, AUX ............. 60 dB (DIN, 50 mW output)
Input sensitivity/impedance
PHONO (MM) .............................................. 2.5 mV/33 kΩ
Adv. DA / CD, MD/CD-R,
TUNER, TAPE, AUX ................................... 200 mV/47 kΩ
Tone control
BASS ........................................................ ±6 dB (at 100 Hz)
TREBLE .................................................... ±6 dB (at 10 kHz)
Output level/impedance
MD/CD-R REC, TAPE REC, ....................... 200 mV/2.7 kΩ
General
Power consumption ...................................................... 150 W
AC outlet
SWITCHED ........................................ 2 (total 200 W max.)
UNSWITCHED ............................................ 1 (100 W max.)
Dimensions ............................................................ W: 440 mm
Weight (net) .................................................................. 7.8 kg
1. KENWOOD follows a policy of continuous advancements in development. For this reason specifications may be changed with-
out notice.
Notes Notes
2. The full performance may not be exhibited in extremely cold locations (below freezing).
KAF-1030/3030R

SPECIFICATIONS

KAF-1030
Rated output power
(DIN) 1 kHz
(IEC/DIN) from 63 Hz to 12.5 kHz, 0.7 % T.H.D.
Effective output power
Except UK and Europe
(EIAJ) 1 kHz, 10 % T.H.D.
Damping factor ........................................................ 42 (50 Hz)
Total harmonic distortion
................................... 0.02 % (20 Hz ~ 20 kHz, 20 W, 8 Ω)
................................................. 0.002 % (1 kHz, 20 W, 8 Ω)
Frequency response (IHF'66)
SOURCE DIRECT .................. 5 Hz ~ 85 kHz, +0 dB, –3 dB
CD, MD/CD-R,
TUNER, TAPE, AUX ............. 5 Hz ~ 60 kHz, +0 dB, –3 dB
PHONO 'RIAA' response ... 20 Hz ~ 20 kHz, +1.0 dB, –1.0 dB
Maximum input level
PHONO (MM) .................... 100 mV, 0.5 % T.H.D. at 1 kHz
Signal to noise ratio
PHONO (MM) ............................................... 72 dB (IHF'66)
CD, MD/CD-R, TUNER, TAPE, AUX ......... 100 dB (IHF'66)
PHONO (MM) ........................ 60 dB (DIN, 50 mW output)
CD, MD/CD-R,
TUNER, TAPE, AUX ............. 60 dB (DIN, 50 mW output)
Input sensitivity/impedance
PHONO (MM) ............................................... 2.5 mV/33 kΩ
CD, MD/CD-R, TUNER, TAPE, AUX .......... 200 mV/47 kΩ
Tone control
BASS ........................................................ ±6 dB (at 100 Hz)
TREBLE .................................................... ±6 dB (at 10 kHz)
LOUDNESS control
VOLUME at –30 dB level ....................... +9 dB (at 100 Hz)
Output level/impedance
MD/CD-R REC, TAPE REC, ....................... 200 mV/2.7 kΩ
General
Power consumption ...................................................... 130 W
Dimensions ............................................................ W: 440 mm
Weight (net) .................................................................. 7.2 kg
H: 95 mm
D: 400 mm
at 8 Ω .............................................................. 40 W + 40 W
at 4 Ω .............................................................. 60 W + 60 W
at 8 Ω .............................................................. 40 W + 40 W
at 4 Ω .............................................................. 60 W + 60 W
at 8 Ω .............................................................. 55 W + 55 W
at 4 Ω .............................................................. 75 W + 75 W
H: 95 mm
D: 400 mm
19