Any maintenance procedure must be performed by a CONTEST authorised technical service. Basic cleaning operations must tho- roughly follow our safety instructions.
Page 3
LED-UV12 - 12x3W UV LEDs projector English Instructions and recommendations 1 - Please read carefully : 12 - Cleaning precautions : We strongly recommend to read carefully and understand Unplug the product before attempting any cleaning the safety instructions before attempting to operate this unit.
Page 4
3.2 - Installation The LED-UV12 was designed to be either suspended via its suspension bracket or standing directly on the ground. We strongly recommend to use a double system with safety cables in case the first one breaks. The safety cable must be able to hold 10 times the weight of the device.
LED-UV12 - 12x3W UV LEDs projector English 4 - Rear panel description: Power input DMX output Allows you to connect the projector to an electrical 3-pin male XLR plug hardwired as follows : outlet. - Mass: 1 Please make sure the voltage is in adequation with - Negative signal: 2 the product indications.
LED-UV12 - 12x3W UV LEDs projector English 5 - Menu and functions Press MODE to access the internal menu and its functions. Press ENTER to switch from a sub-menu to the next one. Use the buttons UP or DOWN to modify values and confirm with ENTER.
Page 7
LED-UV12 - 12x3W UV LEDs projector English 6 - DMX channels and their values DMX values Effects CHANNEL 1 000 - 255 Dimmer from 0 - 100% CHANNEL 2 000 - 255 Strobe speed from slow to fast Page 7...
Page 8
That is why technical specifications and the products physical configuration might differ from the illustrations. ® Make sure you get the latest news and updates about the CONTEST products on www.contest-lighting.com CONTEST ®...
Need help?
Do you have a question about the LED-UV12 and is the answer not in the manual?
Questions and answers