Locating And Finding A Mislaid Item - Panasonic KX-TGA20AZ Installation Manual

Installation
Changing the key finder name
1
Handset:
For key finder 1: M
For key finder 2: M
For key finder 3: M
For key finder 4: M
*1
2
Enter the desired name (10 characters max.).
3
MOKN or MSAVEN a MeN or MOFFN
Attaching the key finder to an easy-to-lose item
You can attach the key finder to items such as a car key or house key, etc.

Locating and finding a mislaid item

You can locate and find the mislaid item to which the key finder is attached using
the handset.
1
Handset: M
2
MbN: "Search" a MOKN or MSELECTN
3
MbN: Select the desired key finder. a MOKN or MSELECTN
R When the handset searches for the key finder, the handset emits the
R The search is stopped after 3 minutes. To continue searching, repeat from
R While searching, you can turn off the handset detection beeps by pressing
4
To stop searching, press MeN or MOFFN.
4
TGA20EX_FX_AZ(en)_0206_ver103.pd4
N (right soft key) or MMENUN a #6561
N (right soft key) or MMENUN a #6562
N (right soft key) or MMENUN a #6563
N (right soft key) or MMENUN a #6564
If you have 2 or more key finders.
N (right soft key) or MMENUN a #655
detection beeps and displays the signal strength (5 levels) and level value
(1 – 100), and then the key finder emits responding beeps. As you point the
handset in the right direction and then move closer to the item:
– Handset: the frequency of the detection beeps will increase and a higher
signal strength and level value will be displayed.
– Key finder: the responding beeps are emitted during searching.
step 3.
M N or MMUTEN.
4
*1
*1
*1
2013/02/06 16:38:01