Advertisement
Playback modes
Changing play modes
Each time you press
MODE
7
7
RND
1
One track
All track
Random
repeat
repeat
No display (cancelled)
You cannot select "RND" and "A 7 B" with MP3.
MP3
wSpecifying the AB segment
Press to specify the start point (A).
Press once more to specify the end point (B).
MEMO/
DISP
p Stop or skip ( page 5) to cancel.
p If you do not specify point B this will automatically be set as the
end of the disc. Repeat begins when this point is reached. You can
also specify point B again by pressing [ MEMO/
Playing desired tracks only (Program play)
Backward
MEMO/
DISP
Track number
CD-DA
3
MP3
Sequence number
Repeat steps
to
Confirm tracks selected:
While playing, press [ MEMO/
Cancel:
While playing, press [/w] (Remote control)./
Press [w] (Main unit).
("M" disappears.)
Playing only the tracks in a selected album
(Album mode)
MP3
Each time you press and hold
MODE
Album mode
(Only tracks on the desired
album are played)
p To select another album ( page 5, Album skip)
p You cannot select album mode during program play ( above).
Connecting to other equipment
Turn off this unit and the other equipment before connection.
Insert each plug fully. (Plug type: 3.5 mm stereo)
If you don't want the remote control operation tone, turn it off ( page 5).
Main unit
Audio cable (not included)
pYou cannot use an
Remote
control
optical cable.
When connecting the unit to other equipment, set the volume
level between 10 to 15, then use the volume control on the other
equipment to adjust the volume.
and
MP3
CD-DA
limitations on these discs only.
While playing
While paused
7
7
RND
A
Random
AB repeat
repeat
( below)
DISP].
While stopped, tilt to select
the track number.
Forward
Press to enter.
Sequence number
01
M
will appear after
[ MEMO/
DISP] is pressed
ALBUM
01
3
1
M
M
Album number
Track number
to program up to 20 tracks.
Press to play.
No display
(cancelled)
Audio system
and so on
To CD or AUX terminals
Handy functions
indicate
Changing the sound quality/the sound effects
You can combine the sound quality and sound effects settings. Set the
sound quality by pressing [EQ], then the sound effects by pressing and
or
holding [EQ]. (You can also set the sound effects first.)
B
wChanging the sound quality
While playing, each time
you press
H.BASS
Add powerful bass
H.BASST
Enhanced H.BASS
S-XBS
Boosts the bass
S-XBST
Enhanced S-XBS
Reduces sound leaks
TRAIN
and listening fatigue
No display (Cancels all
sound quality effects)
p If you select 3D-1 or 3D-2, the sound volume may be reduced.
pThe effect may differ with different kinds of music.
pSound may be interrupted when switching between EQ settings.
pIf you select 3D-1 or 3D-2 then try playing a disc that contains both CD-ROM
format and CD-DA format tracks, there will be a brief noise when the disc
changes from playing the CD-ROM format track to the CD-DA format one.
pIf RMTR is ON when playing MP3, the effects are cancelled as soon as
CD-DA is played.
Changing the anti-skip mode
The anti-skip function (ANTI-SKIP SYSTEM) reduces or eliminates skipping
caused by vibration. You can change the anti-skip memory time.
MEMO/
DISP
POS2
Sound enhanced mode
Able to withstand a maximum of
DISP].
10 seconds of vibration
MP3
You cannot change the memory time for MP3. It is a maximum
of 100 seconds for MP3 recorded at 128 kbps.
Changing the display
MEMO/
DISP
While playing, each time
you press and hold
p " ~ " is displayed in place of anything over 32 characters.
p "_" is displayed in place of characters this unit cannot display.
p "
" appears if ID3 tags haven't been entered.
When the display is difficult to see...
(On the main unit)
Set the main unit to HOLD while stopped. While pressing and holding
[/ ], press [T] (darker) or [U] (lighter).
To see the display in the dark
Each time you change the position of the hold switch on the remote
control, the display will light for approx. 5 seconds.
6
MP3
limitations on these discs only.
EQ
wChanging the sound effects
While playing, each time
you press and hold
3D-1
3D-2
RMTR
MP3
No display (Cancels all
sound quality effects)
MP3
RMTR (Digital Re-master):
You can regenerate signal frequency
lost during compression, restoring the
sound to near pre-compression form.
CD-DA
While stopped,
each time you press and hold
POS1
Anti-skip enhanced mode
Able to withstand a maximum of
45 seconds of vibration
MP3
MYBEST
Sympho
Id3 Dream
Id3 Symph
2 1:26
(Contrast adjustment)
and
CD-DA
indicate
Sound field of 3D
Enhanced 3D-1
More natural
sound quality
Album title
Track title
ID3 artist name
ID3 track title
Track number and
elapsed play time
RQT8193
Advertisement
