Remote Control - Panasonic CU-4E23LBE Operating Instructions Manual

REMOTE CONTROL

Airfl ow direction louver
Air fi lter
Intake grille
Remote
Control display
3
6
7
8
6
Transmitter
Maximum distances: 8m
Control Panel
POWER (Green)
TIMER (Orange)
POWERFUL (Orange)
QUIET (Orange)
AIR SWING (Orange)
Auto OFF/ON button
• Used when remote control is misplaced or a
malfunction occurs.
Step
1
2
3
4
Press the button to turn off.
Press the remote control's button
1
TO TURN ON OR OFF THE UNIT
• Please be aware of the OFF indication on the remote control
display to prevent the unit from starting/stopping improperly.
2
TO SET TEMPERATURE
• Selection range: 16˚C ~ 30˚C.
• Operating the unit within the recommended temperature
could induce energy saving.
HEAT mode : 20˚C ~ 24˚C.
COOL mode : 26˚C ~ 28˚C.
DRY mode : 1˚C ~ 2˚C lower than room temperature.
1
4
3
TO SELECT OPERATION MODE
5
AUTO mode - For your convenience
2
• During operation mode selection the power indicator blinks.
5
• Unit selects operation mode every 10 minutes according
to temperature setting and room temperature
(For single Split System).
• Unit selects operation mode every 3 hours according to
temperature setting, outdoor and room temperature
(For Multi split system).
9
HEAT mode - To enjoy warm air
• Unit takes a while to warm up. The power indicator blinks
during this operation.
COOL mode - To enjoy cool air
• Use curtains to screen off sunlight and outdoor heat to
reduce power consumption during cool mode.
DRY mode - To dehumidify the environment
• Unit operates at low fan speed to give a gentle cooling
operation.
AUTO
Action
Press once.
Press and hold until you
hear one beep, then release.
Repeat step 2. Press and
hold until you hear two
beeps, then release.
Repeat step 3. Press and
hold until you hear three
beeps, then release.
Remote
Control
Receiver
Mode
Automatic
Force
cooling
Normal
cooling
Force
heating