Panasonic KX-TGE220E Operating Instructions Manual page 41

After you answer the new message alert call,
you can listen to messages from that call
(page 41).
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
Storing a phone number to which the
unit makes an alert call
n From the phonebook:
1
MMENUN#338
2
MbN: "Notification to" a MOKN
a MADDN
3
MbN: "Phonebook" a MOKN
4
MbN: Select the desired phonebook
entry. a MOKN a M
n By entering a phone number:
1
MMENUN#338
2
MbN: "Notification to" a MOKN
a MADDN
3
MbN: "Manual" a MOKN
4
Enter the desired name (16 characters
max.). a MOKN
5
Enter the desired number (24 digits
max.). a MOKN 2 times a M
Turning on/off the new message alert
setting
1
MMENUN#338
2
MbN: "On/Off" a MOKN
3
MbN: Select the desired setting. a MOKN
a M N
Editing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MOKN
3
MMENUN a MbN: "Edit" a MOKN
4
Edit the name if necessary (16 characters
max.). a MOKN
Helpline Tel. No.: U.K. 0844 844 3899 Ireland 01289 8333
TGE2xxE_(en_en)_0307_ver.030.pdf
5
Edit the phone number if necessary (24
digits max.). a MOKN 2 times a M
Erasing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MOKN
3
MMENUN a MbN: "Erase" a MOKN
4
MbN: "Yes" a MOKN a M
R The new message alert setting is
Activating/inactivating the remote
access code to play messages
If you activate this feature, you must enter the
remote access code (page 42) to play the
new message from the new message alert
N
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code and then press 4 to play new
message.
1
MMENUN#338
N
2
MbN: "Remote Code" a MOKN
3
MbN: Select the desired setting. a MOKN
a M
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
2
41
Answering System
turned off.
N
Enter the remote access code
(page 42) during the announcement.
Press 4 to play the new message.
2014/03/07
N
N
41
15:08:33