Hitachi CP-WU8460 User Manual page 4

COMPUTER IN2
BNC jack x5
<Computer signal>
• Video signal: RGB separate, Analog, 0.7Vp-p, 75Ω terminated (positive)
• H/V. sync. signal: TTL level (positive/negative)
• Composite sync. signal: TTL level
<Component video signal>
• Video signal: Y with composite sync, Analog, 1.0±0.1Vp-p, 75Ω terminated
Cb/Pb, Analog, 0.7±0.1Vp-p, 75Ω terminated
Cr/Pr, Analog, 0.7±0.1Vp-p 75Ω terminated
• System: 480i@60, 480p@60, 576i@50, 720p@50/60, 1080i@50/60, 1080p@50/60
H I
HDMI 1, HDMI 2
TM
HDMI connector
• Audio signal: Linear PCM (Sampling rate; 32/44.1/48 kHz)
Pin Signal
1 T.M.D.S. Data2 +
2 T.M.D.S. Data2 Shield
3 T.M.D.S. Data2 -
4 T.M.D.S. Data1 +
5 T.M.D.S. Data1 Shield
6 T.M.D.S. Data1 -
7 T.M.D.S. Data0 +
H
C D
G/Y, B/Cb/Pb,
Pin
8 T.M.D.S. Data0 Shield
9 T.M.D.S. Data0 -
10 T.M.D.S. Clock +
11 T.M.D.S. Clock Shield
12 T.M.D.S. Clock -
13 CEC
14 Reserved (N.C. on device)
Connection to the ports (continued)
I
C D
F F
G
E F
R/Cr/Pr, H,
Signal
E
G
V
② ④ ⑥ ⑧ ⑩ ⑫ ⑭
① ③ ⑤ ⑦ ⑨ ⑪ ⑬
Pin Signal
15 SCL
16 SDA
17 DDC/CEC Ground
18 +5V Power
19 Hot Plug Detect
⑯ ⑱
⑲ ⑰ ⑮ ⑬
⑮ ⑰ ⑲ ⑱ ⑯ ⑭
5