Timer; Setting The On/Off Timer; Setting The On Timer - Samsung MR-EC00 User Manual

TIMER

Setting the On/Off timer

You can set the air conditioner to be turned on or off automatically at desired time .

Setting the On timer

When the air conditioner is turned off.
Remote controller display
Select the mode from (Auto)  (Cool)  (Dry)  (Fan) and  (Heat) .
❋ ❇ Heat mode operates with MR-EH00/MR-EH00U model only .
You can adjust the temperature after timer setting is completed .
Temperature adjustment is only available in Auto/Cool/Dry/Heat mode . In Fan mode, temperature cannot be
adjusted .
❋ ❇ Heat mode operates with MR-EH00/MR-EH00U model only .
• When On timer setting is completed, the set status will be displayed for 3 seconds, and then only (On) indicator
will remain on the remote controller display thereafter .
NOTE
• You cannot set the Fan speed when setting the On timer .
MR-EH00_IB_04667A-01_EN.indd 13
1 . Press the Timer button to select (On) .
- (On) indicator will keep blinking and you can set the time .
2 . Press the < or > button to set the time .
- You can set the time in half hour unit from 30 minutes (0 . 5 on the display) ~
3 hours and hour unit from 3 ~ 24 hours .
- Time can be set from minimum 30 minutes to maximum 24 hours .
3 . Press the SET button to complete the On timer setting .
- (On) indicator and the set time of the timer will be displayed on the remote
controller display .
- On timer setting will be cancelled if you don't press the SET button within
10 seconds after setting the time . Therefore, check for the (On) indicator on the
remote controller display .
f Press the Timer button  select (On)  press the < or > button  X
Cancel
set the timer to
Additional options available in On timer
ENGLISH-13
 press the SET button .
2014-12-04 오전 10:29:06