Pioneer DEH-X3550UIXNESDEH-X3550UI/XNES1DEH-X3590UI/XNID Service Manual page 18

1
USB storage device / iPod
Message Cause
A
FORMAT Sometimes
READ there is a delay
between the
start of playback
and when you
start to hear any
sound.
NO AUDIO There are no
songs.
B
The connected
USB storage de-
vice has secur-
ity enabled.
SKIPPED The connected
USB storage de-
vice contains
files embedded
with Windows
Media ™ DRM 9/
10.
C
PROTECT All the files in
the USB storage
device are em-
bedded with
Windows Media
DRM 9/10.
N/A USB The USB device
connected to is
not supported
by this unit.
D
CHECK USB The USB con-
nector or USB
cable has short-
circuited.
E
CHECK USB The connected
USB storage de-
vice consumes
more than maxi-
mum allowable
current.
F
18
1
2
Action
Wait until the
message disap-
pears and you
hear sound.
Transfer the audio
files to the USB
storage device
and connect.
Follow the USB
storage device in-
structions to dis-
able the security.
Play an audio file
not embedded
with Windows
Media DRM 9/10.
Transfer audio
files not em-
bedded with
Windows Media
DRM 9/10 to the
USB storage de-
vice and connect.
 Connect a USB
Mass Storage
Class compliant
device.
 Disconnect
your device and
replace it with a
compatible USB
storage device.
Check that the
USB connector or
USB cable is not
caught in some-
thing or dam-
aged.
Disconnect the
USB storage de-
vice and do not
use it. Turn the
ignition switch to
OFF, then to ACC
or ON and then
connect only
compliant USB
storage devices.
DEH-X35UI/XNUC
2
3
Message Cause
CHECK USB The iPod operates
correctly
but does not
charge.
ERROR-19
Communication
failed.
iPod failure.
ERROR-23 USB storage de-
vice was not for-
matted with
FAT12, FAT16 or
FAT32.
ERROR-16 The iPod firmware
version is
old.
iPod failure.
STOP There are no
songs in the
current list.
NOT FOUND No related
songs.
3
4
Action
Make sure the
connection cable
for the iPod has
not shorted out
(e.g., not caught
in metal objects).
After checking,
turn the ignition
switch OFF and
back ON, or disconnect
the iPod
and reconnect.
Perform one of
the following operations.
–Turn the ignition
switch OFF and
back ON.
–Disconnect the
USB storage device.
–Change to a different
source.
Then, return to
the USB source.
Disconnect the
cable from the
iPod. Once the
iPod's main
menu is displayed,
reconnect
the iPod and reset
it.
USB storage de-
vice should be for-
matted with
FAT12, FAT16 or
FAT32.
Update the iPod
version.
Disconnect the
cable from the
iPod. Once the
iPod's main
menu is displayed,
reconnect
the iPod and reset
it.
Select a list that
contains songs.
Transfer songs to
the iPod.
4