Programming Codes From Other Remote Controls (Learn) - Yamaha RX-V1500 Owner's Manual

8
Press one of the buttons shaded below to
see if you can control your component. If you
can, the remote control code is correct.
TRANSMIT
SYSTEM
POWER POWER STANDBY POWER
TV AV
A B INPUT MODE SLEEP
PHONO TUNER CD MULTI CH IN
V-AUX CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
y
If the manufacturer of your component has more than one
code, try each of them until you find the correct one.
Notes
• "ERROR" appears in the display window if you press a button
not indicated in the respective step, or when you press more
than one button simultaneously.
• The supplied remote control does not contain all possible codes
for commercially available audio and video components
(including YAMAHA components). If operation is not possible
with any of the remote control codes, program the new remote
control function using the Learn feature (see "Programming
codes from other remote controls (Learn)") or use the remote
control supplied with the component.
• Function programmed using the learn feature take priority over
remote control code functions.
THX STANDARD EXTD. SUR
9 0 +10 ENT.
FREQ/RDS EON MODE PTY SEEK START
REC
DISC SKIP
OFF ON MACRO LEARN CLEAR RE–NAME
Programming codes from other
remote controls (Learn)
Use the Learn feature if you want to program functions
not included in the basic operations covered by remote
control codes, or an appropriate remote control code is not
available. You can program any of the buttons available in
the component control area (see page 68). The buttons can
be programmed independently for each component.
Note
This remote control transmits infrared beams. If the other remote
control also uses infrared beams, this remote control can learn
most of its functions. However, you may not be able to program
some special signals or extremely long transmissions. (Refer to
the operating instructions for the other remote control.)
1
Set AMP/SOURCE/TV to SOURCE.
AMP
SOURCE
TV
2
Press an input selector button to select a
source component.
A B INPUT MODE SLEEP
PHONO TUNER CD MULTI CH IN
V-AUX
CBL/SAT MD/TAPE CD-R
DTV VCR 1 DVR/VCR2 DVD
3
Place this remote control about 5 to 10 cm
(2 to 4 in) apart from the other remote control
on a flat surface so that their infrared
transmitters are aimed at each other.
5 to 10 cm (2 to 4 in)
REMOTE CONTROL FEATURES
71