20
Installation
Connecting the
antennas
Connect the supplied AM loop antenna and
FM wire antenna.
Before connecting the antenna, be sure to
disconnect the AC power cord.
3
AM loop antenna
,
Note
• To prevent noise pickup, keep the AM Loop
antenna away from the unit and other
components.
• Be sure to fully extend the FM wire antenna.
After connecting the FM wire antenna, keep
it as horizontal as possible.
AR936TS-AH_DNGAFLX_ENG.indd 20
FM wire antenna
Connecting a portable
device
1. Connect the PORT. IN jack on AV Receiver
System to the head phone or LINE OUT jack
on your Portable device (MP3 player, etc.)
using a portable cable ( 3.5 mm stereo
plug).
AV Receiver
System
Portable device
(MP3 player, etc...)
2. Set the input source to PORTABLE (Pages
25-26).
2013-09-09
11:20:21