Smith SERIES 28RTS/HE Installation & Operating Instructions Manual page 13

SERIES 28RTS/HE BOILER INSTALLATION AND OPERATION INSTRUCTIONS
Figure 11 - Burner Mounting Plate Details
Observation Port Assembly, Figure 12
1. Position the hinged end of the steel flapper door,
item 5, over the boss on the observation port cover,
item 4.
2. Drive the expansion pin, item 7, through the hinge
bosses to secure the door to the cover.
3. Insert the hex bolt, item 6, through the hole in the
observation port cover.
4. Install the spring, nut and knob, items 3, 2 & 1 on
the bolt as shown. Use the nut, item 2, as a jam nut
against the knob, item 1.
5. Apply the insulating tape to the back of the
observation port cover as shown.
Figure 12 - Observation Port Assembly
Page 13