Problem
• Video mode or HDMI is not correctly set in the TV
• The cables are connected to the HDMI mini
Images are not
displayed on TV.
• The memory card contains no images. Replace the
• The camera is off.
• The battery is exhausted.
• The USB cable is not correctly connected.
Nikon Transfer 2
does not start
• The camera is not recognized by the computer.
when camera is
• Confirm system requirements.
connected to a
• The computer is not set to start Nikon Transfer 2
computer.
• The memory card contains no images. Replace the
Images to be
printed are not
• Remove the memory card to print images from the
displayed.
The camera cannot be used to select the paper size in
the following situations, even when printing from a
Cannot select
PictBridge-compatible printer. Use the printer to select
paper size with
the paper size.
camera.
• The printer does not support the paper sizes
• The printer automatically selects the paper size.
Cause/Solution
settings setup menu.
connector and to the USB/audio/video output
connector simultaneously.
memory card. Remove the memory card to play back
images from the internal memory.
automatically. For more information about Nikon
Transfer 2, refer to help information contained in
ViewNX 2.
memory card.
internal memory.
specified by the camera.
A
100,
E86
102,
106,
E18
24
26
26
102,
106
–
104
106
24
25
E21,
E22
–
F15