Yamaha RX-V659 Owner's Manual page 9

8 Cursor buttons u / d / j / i, ENTER
Select and adjust the sound field program parameters or
the "SET MENU" parameters.
9 RETURN
Returns to the previous menu level when adjusting the
"SET MENU" parameters.
0 TRANSMIT indicator
Flashes while the remote control is sending infrared
signals.
A STANDBY
Sets this unit to the standby mode (see page 31).
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
B POWER
Turns on this unit (see page 31).
Note
This button is operational only when MASTER ON/OFF on the
front panel is pressed inward to the ON position.
C SLEEP
Sets the sleep timer (see page 41).
D MULTI CH IN
Selects the component connected to the MULTI CH
INPUT jacks as the input source when using an external
decoder, etc. (see page 44).
E VOLUME +/–
Increases or decreases the volume level.
F Component selector switch
Selects the operation mode of the remote control buttons
in the shaded area.
AMP
Operates this unit.
SOURCE
Operates the component selected with an input
selector button (see page 93).
TV
Operates the TV assigned to either DTV/CBL or
PHONO (see page 92).
Notes
• To set the remote control codes for other components, see
page 94.
• When you set the remote control codes for both DTV/CBL and
PHONO (see page 94), priority is given to the one set for DTV/
CBL.
G MUTE
Mutes the audio output. Press again to restore the audio
output to the previous volume level (see page 40).
H STRAIGHT (EFFECT)
Turns the sound field programs off or on. When the
"STRAIGHT" mode is selected, 2-channel or multi-
channel input signals are output directly from their
respective speakers without effect processing (see
page 45).
I NIGHT
Turns on or off the night listening modes (see page 40).
J SET MENU
Enters "SET MENU" (see page 78).
K ON SCREEN
Selects the on-screen display (OSD) mode for your video
monitor (see page 47).
L Radio Data System tuning buttons
(U.K. and Europe models only)
FREQ/TEXT
Switches the Radio Data System display between the
PS mode, PTY mode, RT mode, CT mode (if the
station offers the corresponding data services) and the
frequency display (see page 61).
PTY SEEK MODE
Sets this unit to the PTY SEEK mode (see page 59).
PTY SEEK START
Starts searching for a station once the desired program
type is selected in the PTY SEEK mode (see page 59).
EON
Selects a program type (NEWS, AFFAIRS, INFO, or
SPORT) for automatic tuning (see page 60).
CONTROLS AND FUNCTIONS
7