Clamp Position Data For The Programmable Tailstock; Resetting The Clamp Position Data - mori seiki SL-150 Service Manual

P-6
CLAMP POSITION DATA FOR THE PROGRAMMABLE
TAILSTOCK
3.
The clamp position of the programmable tailstock body is written to the data table (retained
if
power is turned off) and is updated automatically as the tailstock is moved.
If the memory area is cleared, it is necessary to set the clamp position data correctly.
The clamp position data must be set correctly. If the setting is incorrect, the
tailstock cannot be connected with the saddle correctly.
Resetting the Clamp Position Data
The procedure to set the clamp position data, for the tailstock, is indicated below.
<Example>
©
3.1
1ÿ0
Tailstock
<1
Clamp position
(coordinate values
in the
machine coordinate
system)
1 ) Place the DOOR INTERLOCK key-switch in
the NORMAL position.
2)
Close the front door.
DOOR INTERLOCK
NORMAL RELEASE
w
3) Make the on-site
adjustment mode valid.
0
Make sure that the STATUS indicator
[ MRDY ] is lit.
STATUS
O ERR
•
MRDY
O M00/M01 O TRCL
O M02/M30 OX-!
4-
O CHCL O Z
-J