Appendix 1 - Toshiba TDP-SW20 Service Manual

APPENDIX 1

[How to reset the User lamp time and error items]
1. How to reset the User lamp time only
Plug the power cord.
Press and hold the projector's
[Input], [ON/Standby], and [Menu] buttons simultaneously,
turn on the Main power switch.
The User lamp time is reset and +1 is added to the reset counter.
Power on and Power off (standby) for storing data.
2. How to reset Error count, Shut down, Error logs and Burn in mode data
Enter the Adjustment Mode (Factory Mode), press [Input] and [Down]
buttons simultaneously.
Then, press [Setup] button for resetting Error items.
Press [Up], [Down], [Left] and [Right] buttons simultaneously for storing data.
132