Thermal Td50 Dish Washer Operating Instructions; Preparation (Td50) - clenaware Advanced SD50 Mark 5 Owner's Manual

Thermal TD50 Dish Washer Operating

Preparation (TD50)

 Ensure that the machine interior is clean and soil-free, and that the top and bottom
spray bars rotate freely, and jets are clean and correctly located.
 Ensure that all four filters are in position in the wash tank trough:
Primary Flat Disc Filters (2) are fitted to the wash and waste outlets. Secondary Drum
Filter fitted over the wash outlet (left-hand outlet). Main Tray Filter that encloses the
wash tank trough.
 Check that the detergent and rinse aid containers have sufficient liquid level and
that the suction tubes are in their appropriate products. Blue Tube for rinse aid,
and Clear Tube for detergent.
 Switch on the water and electrical supplies to the machine. Close the door.
The Select Switch will be illuminated red.
FILL/READY
DETERGENT
RINSEAID
ROTATION
SELECT
SWITCH
DOOR LOCK
CLOSEDOWN
Switch The Machine On
 Press the I SELECT Switch:
Instructions
CYCLE PROGRESS LED'S
The Select Switch will be illuminated
www.clenaware.co.uk
DISPLAY
SERVICE
blue.
START
SWITCH